Question:
Xhorse KeyTool Plus working on Renault Trafic, I’ve got flash data, how to get 32digit pincode?
On instructions page, scroll down and tool will show how to get pincode using flash data file
Here is the Answer:
On instructions page, scroll down and tool will show how to get pincode using flash data file
Path:
IMMO Programming>>Renault>>General area (General)>>Trafic>>2014->>Flip-keys>>Read PIN code
Steps:
Read PIN code(Models needs to read FLASH)
(1)Some model read password need to perform read-write flash, it may cause the car doesn’t work, if the car doesn’t work, please use the original software to program, please perform with caution.
(2)Switch ignition on
(3)Turn the ignition off.
(4)Switch ignition on
(5)This function requires a key that can start the car to execute
(6)During the operation of this function, a black screen may appear, and the instrument will report various faults (don’t worry about it). It may take about 60 minutes to execute the entire process. Make sure that the vehicle battery is fully charged. To ensure safety, please be sure to connect an external battery, remember not to perform any operations during the communication process, and do not disconnect the OBD diagnostic connector.
(7)This model read password need to perform read-write flash, it may cause the car doesn’t work, if the car doesn’t work, please use the original software to program.
(8)Reading FL ASH, it will take about 25 minutes, please wait patiently. At this time, the headlight may be always on, and the instrument will report various faults, which is a normal phenomenon. Make sure the vehicle battery is fully charged, to ensure safety, please be sure to connect the external battery
(9)Start writing flash function, it may cause the car doesn’t work, if the car doesn’t work, please use the original software to program
Done! Hope this helps!
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: