Fixed! Xhorse VVDI2 Can’t Identify Working Key in VW POLO 2014

Quick Question:

VW POLO 2014, Xhorse VVDI2 can’t identify the working key in the vehicle. Got a working key and it is a blade one. What is happening?


Here are the tips for POLO 2014 Add Key:

1)You need a key that’s programmed to get into that board.

2)Remove the dashboard and read EEPROM 24c32 or 24c64 to enter into service mode

3)Leave Key with ignition ON for 10-15min


Here is his feedback:

Read and clear fault codes with Autel.

Then all worked fine


Done! Hope this could help!