Fixed! VVDI2 Add Key for MQB D70F3426AGJ + chip ST95128 Fail

Question:

I use VVDI2 with Full Licenses.

VVDI2 read cluster model and number attached.

VVDI2 say to select MQB with locked 35xx JC instruments.

Immo data VVDI2 can’t read via obd and show message to read if cluster with/without external eeprom with opening and another programmer (I use to read ST95128 original Xprog full, eeprom file attached).

This cluster 3G0920751 have processor D70F3426AGJ + external eeprom ST95128.

After VVDI2 say upload eeprom in soft to generate immo data.

I select 95128 chip read file and after VVDI2 show that can’t support this type.

I need to add second key, one original key I have

Here is the Answer:

To decode immo data from D70F3426AGJ + external eeprom ST95128, VVDI2 requires cluster cpu data and 8-pin EEPROM data.

And VVDI2 could only identify data from Xhorse Tools (Multi Prog, Key Tool Plus), so it won’t load data from X-PROG3 but give an error.

Done! Hope this helps!

https://www.xhorsevvdi.com

Skype: xhorsevvdi.com

Whatsapp: https://wa.me/8613983756354