Xhorse Dolphin II, set up same high like cutting part and two times when was reading key broke. The prompt shows “ERROR CODE 17 Not detected key”
Here Xhorsevvdi gave the
Dolphin XP005L decode (learn) keys via conductivity, so the probe will get broken if keys are
1)Aluminum or plastic
2)Dirty or oxidized
1)Clean keys esp. bittings using a brush, a blade, cleaners etc.
2)Work with Xhorse Key Reader to avoid breaking probes (this device identifies keys not via conductivity, so don’t need to worry if keys are plastic or clean)
How to Detect Non-conductive Parts?
1)Ensure key is metal not aluminum or plastic
2)Electrical Conductivity Measurement/ Sport detection on Xhorse app
Path: Device Information>> Electrical Conductivity Measurement>>Probe and Clamp/ Spot detection
Hope this could help!