Xhorse XDNP50 EWS3 Adapter Step-by-Step Tutorial(No Soldering)?

Xhorse Solder-free XDNP50 EWS3 Adapter is designed to read BMW EWS3 module. It needs to work with MINI Prog or VVDI Key Tool Plus. Today, xhorsevvdi shares how to use it with Key Tool Plus.

 

Let’s see what’s inside:

 

XDNP50 adapter unit*1

EEPROM Clip*1

Adapter convertor*1

Fixing piece*1

xhorse-xdnp50-ews3-adapter

Part 1. Connection

1)Clip PIN1 by the EEPROM clip

xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-3

2)Use the convertor to connect EWS3 module to XDNP50 EWS3 Adapter

xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-4 xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-5

3)By the diagrams on Key Tool Plus,

Combine EWS3 module and EWS3 adapter and make sure needed points are connected well.

xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-6 xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-7

Then tighten them by the fixing piece.

Finally connect it to VVDI Key Tool Plus Pad.

xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-8

 

Part 2.Device Path

Turn on VVDI Key Tool Plus,

Select

  • Programmer>>IMMO>>BMW>>BMW>>EWS3(Adapter)

Here we can get connection diagrams.

After good connection,

Select “Read”>>”CONFIG” to perform Connection Test.

xhorse-xdnp50-ews3-adapter-step-by-step-tutorial-no-soldering-9

Then we can go back, select “EEPROM” to read and save EWS3 data file.

https://www.xhorsevvdi.com/

Sales xhorsevvdi.com