Problem:
Xhorse VVDI2 generate a key for
Land rover without writing the dump to the KVM.
First key: Remote ok, but ” no key detected” – most of the time.
Second key: Start ok, but no remote at all. Actually give up.
Experience for sharing:
You need to write generated data to KVM after that need to add by obd second remote VVDI2.
Question:
Basically this is if you have KVM dumps already, than you can add key without see the car. The software will change the key ID and write it on the used position and the key should work straight away….but did not for me this time.
Answer:
I never have issue with RangeRover KVM dump and original remotes.
Every time VVDI2 worked flawless.
Related operation guide:
VVDI2 + VVDI Pro make smart key for Land Rover 2015 KVM: confirmed working
VVDI Key Tool Plus Program Land Rover KVM 2015 -2018 AKL
Hope it helps!