Xhorse Dolphin XP-007 Battery Not Charged Solution

Q: Condor Dolphin XP-007, it works when power on, but is not charging. And the charging light flashes red and green as below:

xhorse-condor-dolphin-xp-007-battery-not-charged-solution-1

 

Xhorsevvdi answers:

To make sure if the problem is on battery, you need to take off the cover, unplug the battery before connecting to the power supply. If the problem remains, replace the battery.

 

Note: Taking off cover doesn’t influence warranty.

 

How to take off XP007 key cutting machine’s cover?

Removal sequence(adjust by your needs):

xhorse-condor-dolphin-xp-007-battery-not-charged-solution-2

The battery is inside the back cover (near the lift handle), so care what screws you need to remove by the diagram.

 

Special Notes:

1.Micro-adjuster knob and prepositioning knob can be removed just by your hand.

xhorse-condor-dolphin-xp-007-battery-not-charged-solution-3

2.Adjust main handle to lower motor level before removing the middle cover.

xhorse-condor-dolphin-xp-007-battery-not-charged-solution-4

3.Care connected cables inside covers.

xhorse-condor-dolphin-xp-007-battery-not-charged-solution-5

Video process :Two ways to open outer covering shell of Xhorse Dolphin XP007

Okay, any questions, just contact us.

https://www.xhorsevvdi.com/

 

 

Sales xhorsevvdi.com