VVDI2 and VVDI Prog Program BMW 328i 2014 FEM/DME All Key Lost Successfully

VVDI2 can support BMW FEM/BDC,but you need have BMW FEM/BDC authorization.If you need VVDI2 all software,we suggest VVDI2 full authorization,which includes all authorization for VVDI2 at present:BMW OBD,CAS4,BMW FEM,VAG 4TH,5TH,ID48 96bit,ID48 OBDII,PSA,Porsche,MQB,transponder programmer,J2534.

VVDI2 and VVDI Prog Program BMW 328i 2014 FEM and DME All Key Lost successfully

1.BMW 328i 2014 FEM/DME

BMW 328i 2014 FEM/DME With Key

2.Use VVDI Prog read BMW 328i 2014 ISN,VIN

3.Use VVDI2 Program FEM/BDC Key

step 1:

1. read FEM/BDC coding via OBDII or on the bench
2. you’d better not close this window after starting this procedure

step 2:
1. open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer
2. load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip
3. restore FEM/BDC shell, provide -12v and connect it via OBD

step 3:
1. this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 and step2

2. provide +12v to FEM.BDC and connect it via OBD

step 4:
1. open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip
2. restore FEM/BDC shell and connect it via OBD

step 5:

1.loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming