vvdi pro read FRM E series partition information error

Question: need to read this FRM E series, get message “Partition information error, please select the partition size manually” , how to set partition size manually ..or something wrong with processor??

Solution:

equal to my case

error read mcu xeg128-…………….
[2017-11-24 16:07:50] : ID 0M23Y 0XE010/1M80F 0XE010
[2017-11-24 16:07:50] : Start communication…
[2017-11-24 16:07:50] : Partition-FLASH: 65535 Sectors ( 16383.75 K ) EEE: 65535 Sectors ( 16383.75 K )
[2017-11-24 16:07:54] : Partition information error
[2017-11-24 16:08:01] : Change to 2-MCU–>MOTOROLA-MC9S12–>MC9S12XEG128_UNSECURED
[2017-11-24 16:08:01] : Select <D-FLASH>
[2017-11-24 16:08:01] : Select <D-FLASH>
[2017-11-24 16:08:20] : Change to

2-MCU–>MOTOROLA-MC9S12–>MC9S12XEG128_UNSECURED
[2017-11-24 16:08:21] : Select <D-FLASH>
[2017-11-24 16:08:21] : Select <D-FLASH>
[2017-11-24 16:08:31] : Check Device…
[2017-11-24 16:08:32] : 12V Power Adaptor unconnected
[2017-11-24 16:08:32] : Initialization device…
[2017-11-24 16:08:32] : Initialization success!
[2017-11-24 16:08:33] : Initialization chip…
[2017-11-24 16:08:34] : Try Auto Detect Frequency 00000000
[2017-11-24 16:08:34] : Try Frequency success
[2017-11-24 16:08:34] : ID 0M23Y 0XE010/1M80F 0XE010
[2017-11-24 16:08:34] : Start communication…
[2017-11-24 16:08:34] : D-FLASH: 65535 Sectors ( 16383.75 K ) EEE: 65535 Sectors ( 16383.75 K )
[2017-11-24 16:08:35] : User select no
[2017-11-24 16:08:35] : Device error
[2017-11-24 16:02:43] : 12V Power Adaptor unconnected
[2017-11-24 16:02:43] : Initialization device…
[2017-11-24 16:02:46] : Initialization success!
[2017-11-24 16:02:47] : Initialization chip…
[2017-11-24 16:02:47] : Try Auto Detect Frequency 00000000
[2017-11-24 16:02:48] : Try Frequency success
[2017-11-24 16:02:48] : Start communication…
[2017-11-24 16:02:48] : End communication…
[2017-11-24 16:02:48] : Operation success
[2017-11-24 16:02:48] : ID:E010

Solution: 12V Power Adaptor unconnected this is the clue!!! put 12v DC in

Status:

read ok wirite ok…. UUSP-S Connected, HS Mode 
Detected Oscillator Frequency: 8000kHzReading: Success Device: MC9S12XEG128 Range: 0 – 1FFFF
Detected Oscillator Frequency: 8000kHz
Reading: Success Device: MC9S12XEG128 Range: 0 – 3FFF
Detected Oscillator Frequency: 8000kHz

Edit by xhorsevvdi.com:vvdi pro read FRM E series partition information error