How to use VVDI MB BGA Program Benz W203 All Keys Lost

VVDI MB TOOL V2.1.4 can support Benz W203 EIS all keys lost.And v2.1.4 newly add support get password from w204, w207 EIS while lost all key.Here we will display How to use VVDI MB BGA Program Benz W203 All Keys Lost?

1.Read EIS Key Password

1.1. Please connect VVDI MB Tool with your computer,and start VVDI Benz software.

1.2. Click “EIS tools” on the left.

1.3. Select IR,then choose “Chassis W203,463,639 (K)”

1.4. Click “Read EIS data and password”

1.5. Please insert IR adapter to your car. Remove and insert again if already inserted. And keep 28 seconds.

1.6. Check status of VVDI BGA Tool button. Reading data success. EIS is normal.

1.7. If the software shows “Do you want to read password via IR”. Press Yes to continue.

1.8. Read password via IR will take about 1-4 minutes.

1.9. Save EIS data “HC05 format file”.

2.Prepare Key File

Click “Prepare key file” on the left of software.

Choose “Load EIS File”

Upload EIS data just saved

Tick one used key option: Key 4 and v51

Select Prepare Key File
Save key file

3. Read Write Key

Select Read Write Key.Put smart key on VVDI MB Tool

Click on Identification key on software

Check unused key status.

Select Load Key file

Open key file just saved.

Show Key eeprom data
Click on Write
writing data successClick on Identification key again
Chekc key numberRemove both keys form VVDI Benz and EISInsert IR key into EISSwitch on and off to checkSelect EIS Tools in softwareSelect IR
Select Chassis
Select Read EIS data and passwordInsert IR adapter to car. Take out and insert again if already inserted. Remain 28 seconds.Select no to read password this timeNew key has been program successfully.