I have VVDI PRO, I have try to read Kia picanto with fujistu
mb91f061b without success…. I have try many pin out.. even with mcu cable v2 and v3
I always get device error and vvdi shut off…. my friend did a similar dash with a little difference in board without no problem
[2018-12-04 10:56:50] : Change to 2-MCU–>FUJITSU-MB9XF–>MB91F061
[2018-12-04 10:56:51] : Select <DFLASH>
[2018-12-04 10:56:51] : Select <DFLASH>
[2018-12-04 10:56:56] : Check Device…
[2018-12-04 10:56:58] : 12V Power Adaptor unconnected
[2018-12-04 10:56:58] : Initialization device…
[2018-12-04 10:57:01] : Initialization success!
[2018-12-04 10:57:02] : Initialization chip…
[2018-12-04 10:57:03] : Device error
[2018-12-04 10:57:03] : Device error
[2018-12-04 11:06:11] : Select <DFLASH>
All-focus
Solution:
pin122=SOT0(DUOUT)
pin107=RSTX
pin121=SIN0(DUIN)
pin37=GND
pin36=VCC
pin114=MD0
pin115=MD1
pin116=MD2
Pins MD0 must be HI (Connect to VCC5)
Pins MD1,MD2 must be LO (Connect to GND)
Vcc of chip must be On (5volt)
Whatsapp: 
Skype: