How to use Xhorse Toyota 8A Non-smart Key Adapter with VVDI2?

Xhorse Toyota 8A Non-smart Key Adapter for All Key Lost,without Disassembling Immobilizer Box, work with VVDI2/VVDI Key Tool Max plus MINI OBD Tool,and we will display how to use Xhorse toyota 8a all key lost adapter with VVDI2 key programmer?

Please update your VVDI2 to newest 6.7.0 version.

Xhorse Toyota 8A Non-smart Key Adapter with VVDI2 Connection Diagram

Note:

During the process don’t insert the key,please keep ignition off.

1.Disconnect the positive pole of the car battery to protect the connectior and avoid short circuits.

2.Please connect to fuse box as the image.

3.Please connect the ELV like the wire as shown

4.Please connect to car OBD,all key lost cables and car battery.

5.Please generate start chip referring to software interface.

6.Please disconnect all cables, recover all connection wires as car original status (If the connection wires not recovery to original status and start the car directly,the fuse boxe and device will be burnt)

7.Test generated transponder.

And here is the VVDI MINI OBD Tool+VVDI Max and Xhorse Toyota 8A adapter Connection: