How to change the built-in battery of Condor XC-MINI?

Rechargeable battery of XC-Mini is new accessory for Condor XC-MINI key cutting machine,you can buy the chargeable battery and replace it in Condor MINI,then your condor mini can have bulit-in battery.Here is the guide how to change Condor XC-MINI built-in battery. (Get New  Xhorse Condor XC-Mini Plus Key Cutting Machine)

how-to-change-the-built-in-battery-of-condor-xc-mini-1

Remark: please follow the procedure to operation in case of damage the Mainboard ,do not connect the power during operation
1 , Take off those 4 screws like the picture show
Attention : For your security, do not connect the power in next steps.

how-to-change-the-built-in-battery-of-condor-xc-mini-2

2 , Push the motor inside and hold the white buckle then take out the emergency-stop module like the picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-3

3 , Loose the connection of position 11 &12 like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-4 how-to-change-the-built-in-battery-of-condor-xc-mini-5

4 , Use a screw to make the connection those two cables what are from position 11 & 12 like the picture show ,and use the acetate tape fix the connection well

how-to-change-the-built-in-battery-of-condor-xc-mini-6

5, Fix the cable 6 to the position 12 , cable 7 for position 11 , then put the emergency –stop module back and fix it well

how-to-change-the-built-in-battery-of-condor-xc-mini-7

6, Take off those 2 screws like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-8

7, Turn over the Condor XC-MINI and take off the foot rubber

how-to-change-the-built-in-battery-of-condor-xc-mini-9

8, Take out the Power-board and disconnect all cables like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-10

Original Power interface ( 220V)

Battery charger & display module

how-to-change-the-built-in-battery-of-condor-xc-mini-11

9, Use the battery charger & display module to replace the original power interface like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-12

10 , Fix the cable into the socket according the number between the cable and socket ,make sure every cable will be fix well

how-to-change-the-built-in-battery-of-condor-xc-mini-13

11, Fix the cable of 24V and cable of GND in the right position like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-14

12, Connection the power like picture show then put back the Mainboard and fix it well

how-to-change-the-built-in-battery-of-condor-xc-mini-15

13, Fix the all cables after put back the mainboard , the mainboard should be in fixed very solid ,manage the cables again if not , then fix the foot rubber and screws

how-to-change-the-built-in-battery-of-condor-xc-mini-16

14, Fix those screws like picture show

how-to-change-the-built-in-battery-of-condor-xc-mini-17

15 , The screen , LED , display of battery charger should be on after you press the emergency – stop button , if not ,check the connection again

how-to-change-the-built-in-battery-of-condor-xc-mini-18

Remark : electricity volume will be show by the green light , the LED that is mark ‘’ CHRG ‘’ should be green if it is charged , it will be red during charging0

Sales xhorsevvdi.com