Condor XC-Mini Plus “Cut Fail, 38 (Error Code=38)” Solution

Issue:

Condor XC-Mini Plus, I can decode a key but cannot cut a key. The cutter will not spin. I get message on screen “Cut Fail, 38 (Error Code=38)”.

condor-xc-mini-plus-cut-fail-38-error-code38-solution-1

 

Then he did Stepper motor test and send us results as our technical support required.

condor-xc-mini-plus-cut-fail-38-error-code38-solution-2 condor-xc-mini-plus-cut-fail-38-error-code38-solution-3

 

How to do Stepper motor test?

On Homepage, select

Self Test>>Stepper motor test

Select respectively “X” “Y” “Z” “Main-axis” to test motors.

condor-xc-mini-plus-cut-fail-38-error-code38-solution-4

 

Given the result of not-working main-axis motor, the possible reasons could be on firmware or the power board.

 

Here comes the Solution:

1)Re-update firmware, make sure firmware gets the latest version.

 

2)Take apart the Condor Mini key cutting machine to test the power board.

Note: If you dont know how to do, do not risk and ask professionals for help.

If method 1 doesn’t work, we need to take apart the machine.

Unplug&plug all cables on the power board once and watch the indicator change.

 

Feedback: Red light is on solid, not flashing. Find a black wire loose, press it back into plug and machine works.

condor-xc-mini-plus-cut-fail-38-error-code38-solution-5 condor-xc-mini-plus-cut-fail-38-error-code38-solution-6

 

Related posts:

Xhorse Condor Mini Plus Clamp Can’t Move and “Error Code=45” Solution

Xhorse Dolphin XP-005/Condor XC-Mini Plus Cutter & Probe Breaks Test Method

 

Any question, contact us

https://www.xhorsevvdi.com/

Sales xhorsevvdi.com