Menu
Categories
Condor XC-MINI Key Cutting Machine Ford FO21 Reviews
October 1, 2018 Key Cutting Tool

Condor XC-MINI Key Cutting Machine cut Ford FO21 and Citroen SX09 keys needs to use optional M3 clamp. Here we will share the feedback about Condor MINI cut Ford FO21 keys. (Get New  Xhorse Condor XC-Mini Plus Key Cutting Machine)

1.Condor XC-MINI cut FO21, there is some spacing , cut with 412443.

Adjust the screw in the back and tap back of key with plastic hammer like bump hammer to make sure it is fully seated against stop.

2.Ford FO21 key got an error “Learn Fail” by key duplication way.

Ford FO21 with M3 clamp key cutting error “fail error, 26 (not support) (x = 0, y = 0, z = 0)”

Solution:

Ford FO21 key cutting,it can not support cut by key duplication way.Please do through cut by bitting way.

 

3.Condor XC-Mini have problem with Ford F021 key cutting.Condor MINI Machine makes a hell off a humming noise after last cut and jams into the tool.

So I make cutting first side till it is completed.Stop the machine .Then turn the key around.Restart cutting from beginning . So not to damage my machine…

If need to fix this you will have cut away back part off tool holder till there is nothing left on it(Interesting that demo video only shows first side off key being cut)

Finally. update on my machine and problem with F021 key seems solved . parameter info was 1.08 before ..update .

*